Ubuntu에서 iperf에서 주로 사용하는 명령을 정리
도움말 보기
iperf --help
Usage: iperf [-s|-c host] [options] iperf [-h|--help] [-v|--version] Client/Server: -f, --format [kmKM] format to report: Kbits, Mbits, KBytes, MBytes -i, --interval # seconds between periodic bandwidth reports -l, --len #[KM] length of buffer to read or write (default 8 KB) -m, --print_mss print TCP maximum segment size (MTU - TCP/IP header) -o, --output <filename> output the report or error message to this specified file -p, --port # server port to listen on/connect to -u, --udp use UDP rather than TCP -w, --window #[KM] TCP window size (socket buffer size) -B, --bind <host> bind to <host>, an interface or multicast address -C, --compatibility for use with older versions does not sent extra msgs -M, --mss # set TCP maximum segment size (MTU - 40 bytes) -N, --nodelay set TCP no delay, disabling Nagle's Algorithm -V, --IPv6Version Set the domain to IPv6 Server specific: -s, --server run in server mode -U, --single_udp run in single threaded UDP mode -D, --daemon run the server as a daemon Client specific: -b, --bandwidth #[KM] for UDP, bandwidth to send at in bits/sec (default 1 Mbit/sec, implies -u) -c, --client <host> run in client mode, connecting to <host> -d, --dualtest Do a bidirectional test simultaneously -n, --num #[KM] number of bytes to transmit (instead of -t) -r, --tradeoff Do a bidirectional test individually -t, --time # time in seconds to transmit for (default 10 secs) -F, --fileinput <name> input the data to be transmitted from a file -I, --stdin input the data to be transmitted from stdin -L, --listenport # port to receive bidirectional tests back on -P, --parallel # number of parallel client threads to run -T, --ttl # time-to-live, for multicast (default 1) -Z, --linux-congestion <algo> set TCP congestion control algorithm (Linux only) Miscellaneous: -x, --reportexclude [CDMSV] exclude C(connection) D(data) M(multicast) S(settings) V(server) reports -y, --reportstyle C report as a Comma-Separated Values -h, --help print this message and quit -v, --version print version information and quit [KM] Indicates options that support a K or M suffix for kilo- or mega- The TCP window size option can be set by the environment variable TCP_WINDOW_SIZE. Most other options can be set by an environment variable IPERF_<long option name>, such as IPERF_BANDWIDTH. Report bugs to <iperf-users@lists.sourceforge.net> |
iperf 버전확인
iperf -v
iperf version 2.0.5 (08 Jul 2010) pthreads |
클라이언트 모드(-c)에서 순차적으로 양방향(-r), 시간은 2초(-t 2)
iperf -c 서버주소 -r -t 2
------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ ------------------------------------------------------------ Client connecting to 192.168.100.194, TCP port 5001 TCP window size: 83.9 KByte (default) ------------------------------------------------------------ [ 5] local 192.168.100.102 port 53864 connected with 192.168.100.194 port 5001 [ ID] Interval Transfer Bandwidth [ 5] 0.0- 2.0 sec 15.4 MBytes 63.8 Mbits/sec [ 4] local 192.168.100.102 port 5001 connected with 192.168.100.194 port 49153 [ 4] 0.0- 2.0 sec 16.6 MBytes 69.2 Mbits/sec |
